Notebooks pro no files to upload drivers#
Notebooks pro no files to upload software#
Notebooks pro no files to upload download#

Notebooks pro no files to upload software#

Make sure you have the latest version of software and you have uploaded the calibration using that version of software.ĥ) If you are still having trouble with the K-Pro try using a different laptop, and try the substitution method (try the ecu in another vehicle, try swapping the K-Pro board with a known good board.etc). Check to make sure the K-Pro board inside the ECU is firmly attached, but be careful to ensure that the screw is not so tight as to make the board to bow under the screw. Verify you are using resistor spark plugs (K-Series Spark Plugs). Verify the Ground in the engine bay (K-Series Engine Ground).

Notebooks pro no files to upload download#

You should also only use the Download calibration function as a last resort if you have lost the calibration stored on your laptop.Ĥ) If you are having Datalogging issues, check to make sure your USB cable is firmly attached to the ecu and the laptop. See if the problem persists.Ģ) With the ECU plugged in to the car, the USB cable plugged into the ECU and the Laptop and the ignition switch in the ON position - Does the K-Manager software say Ignition On and Online? If it does not, verify that all the connections have been made, and verify the Ground in the engine bay (K-Series Engine Ground).ģ) If you are having trouble uploading a calibration or with an existing calibration in the ecu, try going to Online, Tools, and click on Clear Security, then try uploading a new calibration. If you are having difficulties with your K-Pro, please follow the troubleshooting steps below:ġ) Make sure you are using the most recent version of software by clicking on HELP and 'Check for Updates' (or go to K-Manager), after updating go back to help and click on HELP and 'Update USB Drivers' then follow the instructions. but i dont see how that can be when it worked in my friends car and then immediately again in mine then shits the bed a day later.įROM HONDATA WEBSITE.you probably done this already but just in case. So i go back out to my car today to try different launch points and it goes back to not loading anything! has anyone experienced anything like this? i talked to hondata the other day and they said it could be a bad ecu or board. put my kpro back in my car and now it loads. then i put his kpro in my car and again loaded fine. Put it in my friends car and it loaded maps no problem.

Notebooks pro no files to upload drivers#

i've already updated the drivers and downloaded the latest (3.1.1) version of kmanager. it will connect to my computer and datalog just fine. tried loading some of the basemaps and same thing. every time i tried it said upload failed.

Yesterday i was trying to upload the same map i've been running since that last tune the only thing i changed was the launch control limiter. i've already confirmed it's a real kpro and it's already been tuned twice the last time being 7-8 months ago. Why hasnt my upload limit been reset Upload limits are reset each. The output of the above code: test.txt file is created in google drive.I have no idea what's going on with it. Notes with large file attachments in the Trash notebook that have not successfully synced.

# Set content of the file from the given string. Step 3 : Upload files to your Google Drive You can customize the behavior of OAuth2 in one settings file settings.yaml Get Closer To Your Dream of Becoming a Data Scientist with 70+ Solved End-to-End ML Projects Step 1: Import the librariesįollow the steps to Get Authentication for Google Service API in the below link: Get Authentication for Google Service APIĭownload client_secrets.json from Google API Console and OAuth2.0 is done in two lines.